No affair how hard yous attempt, you lot actually can't terminate your car's bumper from suffering scratches and even puncture holes. You may exist really cautious, simply the other cars in the parking lot might not be. Luckily, with the right tools and techniques , you can fix a pigsty in a plastic bumper adequately hands and avert a visit to the motorcar torso shop .

six Steps to Fix a Hole in a Plastic Bumper

  1. Get Your Tools and Repair Materials Together – Y'all'll demand the following for your damaged bumper repair.
    1. Wrenches and Screwdrivers – For removing and replacing the bumper encompass.
    2. A Variety of Sandpaper – Accept at to the lowest degree a pick of from fourscore- to 400-grit paper. A finer grit will requite you a smoother surface for painting.
    3. An Exacto Knife or Blade – You may need this to remove burrs or pieces of plastic sticking out from the hole.
    4. Machine Repair Cloth or Fibreglass Repair Tape
    5. Plastic Repair Adhesives and/or Body Filler – The plastic adhesives you need will depend on the type of plastic used in the bumper cover. A stamp on the inside of the bumper cover will list the type of plastic (PP, PPO, TPE, PUR, or TPUR)
    6. Primer Paint and Clear Coat Auto Paint – The paint must match the pigment color of your vehicle.
  2. Remove the Bumper Embrace – You lot'll need to locate the screws that fasten the bumper cover and remove them.
  3. Prep the Bumper Cover Around the Hole – Using sandpaper of a coarser grit and/or the exacto knife make sure the bumper cover surfaces around the hole are free of burrs and pieces sticking out. You may need to do this on the inside and outside of the bumper embrace.
  4. Support the Repair Area – Attach a piece of auto repair cloth or fibreglass record on the inside of the bumper encompass to support the repair agglutinative or filler that you'll apply to the outside of the comprehend.
  5. Apply Filler or Repair Adhesives – You'll need to mix and apply the filler or adhesives co-ordinate to the manufacturer's instructions, which will also tell you how many layers you'll need to apply.

    Spread the compound over the pigsty on the outside of the bumper cover in thin layers. Let it thoroughly dry earlier sanding the expanse polish and applying subsequent layers. For the concluding layer, be sure to sand the repair surface area smooth, following the contour of the bumper cover.
  6. Paint the Bumper – Work in a well-ventilated surface area and vesture a respirator mask, goggles and gloves for this step. Mask the expanse to be painted and apply primer coats and surface paint in light coats according to the pigment manufacturer's instructions. You may need to sand with fine grit paper between coats.

 If you lot found this postal service helpful, check out our contempo article about how to set up curb rash .